Welcome to ZIBO YUNFENG INDUSTRIAL CERAMICS CO., LTD

606/400L-nylon material low consistency cleaner in paper making plant

Short Description:

Low density cleaner application This Investors best choice cardboard pulp paper machine, cardboard pulp cleaner is a type of pulping equipment which is used to remove minute rough granules, foams, plastic and so on in the paper pulp manufacturing process. It is widely used for recycled pulp making and egg tray production line . New type Heavy efficient cleaner The YF Heavy Impurity Cleaner is mainly used for removing heavy impurities like gravel,scrap iron,dust and large ink particles from d...


  • ceramic: 92%/95%97%99%alumina &ZTA
  • sus304: 0Cr18Ni9
  • Product Detail

    Product Tags

    Low density cleaner application

    This Investors best choice cardboard pulp paper machine, cardboard pulp cleaner is a type of pulping equipment which is used to remove minute rough granules, foams, plastic and so on in the paper pulp manufacturing process. It is widely used for recycled pulp making and egg tray production line .

    New type

    Heavy efficient cleaner

    The YF Heavy Impurity Cleaner is mainly used for removing heavy impurities like gravel,scrap iron,dust and large ink particles from different kind of pulp.The highested running consistency can reach 2%,reduce fiber loss,improve production capacity,decrease the needed segments and numbers of cleaner.High cleaning efficiency,which avoid the accumulation of ash content in latter sections.High reliability of operation,would not be blocked.

    Type YF400/600
    Passing capacity of single equipment(l/min) 400-480
    Max operating temperature(ºC) 70
    Max operating pressure(Mpa) 0.4
    Inlet consistency(%) ≤2%
    Washing water flow 20-60l/min

    YF600 series high efficiency heavy slag eliminator can be widely used in all kinds of pulp to fine residue cleaning and separation, is a variety of pulping equipment matching and technical transformation of the first choice of slag removal equipment.
    Principle and structure of YF600 type slag remover

    Structure features

    1. Split structure
    Cleaner for split structure, the whole Cleaner can be divided into 3-4 sections, easy to disassemble and replace.
    2, different ways of slag discharge
    According to the different needs of users to choose different ways of slag discharge, to adapt to the user’s working environment.
    3, ceramic wear-resistant slag removal mouth
    The lower part of the cone of the slag separator adopts ceramic wear-resisting nozzle, which not only ensures stable slag discharge rate but also prolongs the service life.
    The company according to the different slagging way and user’s different needs to provide different forms, various specifications of ceramic slagging mouth.
    4. Each slurry pipe is connected with the hose of the slagger branch, and equipped with a valve to facilitate the flexible use of the whole system to the single slagger.
    5. No moving parts, stable and reliable operation.

    Features

    The unique structural characteristics make the heavy slag cleaner have the following characteristics:
    1, can effectively remove the slurry in the sand, gravel, iron wire and other heavy impurities;
    2, increase the amount and further slag power, relatively reduce the loss of fiber;
    3. Stable operation.
    During operation, it can produce a very stable fluid model, which can effectively and continuously remove impurities.
    4. Significant slurry saving effect.


  • Previous:
  • Next: