Welcome to ZIBO YUNFENG INDUSTRIAL CERAMICS CO., LTD

Good Centri-Cleaner Centricleaner For Paper Pulp Machine ,Slag Separator for Paper Mill

Short Description:

    Low density cleaner application   This Investors best choice cardboard pulp paper machine, cardboard pulp cleaner is a type of pulping equipment which is used to remove minute rough granules, foams, plastic and so on in the paper pulp manufacturing process. It is widely used for recycled pulp making and egg tray production line .   New type heavy impurity cleaner   The Heavy Impurity Cleaner is mainly used for removing heavy impurities like gravel,scrap iron,dust ...


  • ceramic: 92%/95%97%99%alumina &ZTA
  • sus304: 0Cr18Ni9
  • Product Detail

    Product Tags

     

     

    Low density cleaner application

     

    This Investors best choice cardboard pulp paper machine, cardboard pulp cleaner is a type of pulping equipment which is used to remove minute rough granules, foams, plastic and so on in the paper pulp manufacturing process. It is widely used for recycled pulp making and egg tray production line .

     

    New type heavy impurity cleaner

     

    The Heavy Impurity Cleaner is mainly used for removing heavy impurities like gravel,scrap iron,dust and large ink particles from different kind of pulp.The highested running consistency can reach 2%,reduce fiber loss,improve production capacity,decrease the needed segments and numbers of cleaner.High cleaning efficiency,which avoid the accumulation of ash content in latter sections.High reliability of operation,would not be blocked.

     

    Paper pulp cleaning equipment Low Density Cleaner/Centri-cleaner for paper and pulp mill    

     

    product description:

    450 highly efficient heavy Cleaner is a process for removing impurities in the slurry forward centrifugal cleaner principle. Available removal of heavy impurities in the slurry gravel, iron, dust and larger ink particles and other various slurry purification system. 400 heavy Cleaner can be combined according to the slurry different light Cleaner, to achieve the desired cleaning effect.

    Zibo yunfeng industrial ceramics co., LTD

    The main technical parameters

    Single throughput: 450-480L / min
    Into the plasma pressure: O.2-0.4MPa
    Pressure drop. O.14-0.175MPa
    Into the plasma concentration: 0.6-2.5%
    Single-stage slagging volume ratio: 15-30% (relative feed slurry flow rate)

    YF500LF-Q multifunctional slag eliminator is a new type of high efficiency slag eliminator which is developed on the basis of advanced technology at home and abroad. It is a forward slag eliminator which uses centrifugal principle to remove impurities in slurry.
    The concentration of coarse slag is independent of slurry characteristics through the separate control of the slag separator.
    The structure of the system is compact, and the number and number of the slag separator are reduced.
    The separation efficiency is higher, the operating concentration can be up to 3%, the inner surface is smooth, and there is no need to generate turbulence measures.
    The impurity content in coarse slag is high and the fiber loss is smaller.
    By diluting coarse slag and continuously discharging slag in all stages, no blockage occurs during operation and the pulse is minimal.

    Two, the characteristics of YF500LF-Q multi-functional slag remover
    A. Split structure
    Cleaner for split structure, the whole Cleaner can be divided into 3-4 sections, easy to disassemble
    And replacement.
    B. Different ways of slag discharge
    YF500LF-Q Cleaner can choose different ways of slag discharge according to different needs of users: bottom row heavy impurities, top row light impurities, to adapt to the user’s working environment.
    C, ceramic wear-resistant slag removal mouth
    The neck and mouth area of all centrifugal slags is the place where the tangential velocity and wear are the most concentrated.
    The lower part of the cone of the slag separator adopts ceramic wear-resisting nozzle, which not only ensures stable slag discharge rate but also prolongs the service life.
    The company according to the different slagging way and user’s different needs to provide different forms, various specifications of ceramic slagging mouth.
    The main technical parameters of YF500LF-Q multifunctional slag remover

    Technical specifications

    Single pass: 450-480L/min
    Maximum operating pressure: 4kg/cm²
    Maximum operating temperature: 70°C
    Pressure difference between inlet and outlet slurry: 1.6 ~ 2.0kg/cm²
    Single feed flow: 435~480L/min
    Minimum good slurry pressure: 0.1kg/cm²
    Inlet concentration: less than 3%
    Lime dust removal rate: > 90%
    Flushing water flow: 20 ~ 60L/min

    Four, the main performance advantages

    adopts advanced centrifugal purification technology
    high efficiency, to ensure water slurry cleanliness
    low pressure drop, reduce system power consumption
    arrangement is compact, reduce cover an area of an area
    each slag separator in and out of the plasma tube is equipped with a valve respectively, reduce system downtime, increase the system agility and reliability
    reinforced nylon material durability
    can choose different forms according to different needs, different specifications of ceramic wear-resisting slag mouth
    choose different discharge modes

    Five, the main application scope

    YF500LF-Q multi-function slag remover suitable installation position
    A. After the low concentration sieve and before the thickener in various pulping systems
    B, before the light slag cleaner
    C. Slurry flow system in front of paper machine
    2, the slag can be used for the following kinds of slurry preparation system
    A. Regenerated fiber system
    B. Chemical pulping system
    C. Deinking system


  • Previous:
  • Next: